UDT wireline retrievable injection pressure operated gas lift valves
UDT wireline retrievable injection pressure operated gas lift valves uses nitrogen charged, multiply monel bellows to provide the force necessary to maintain the valve normally in closed position. These gas lift valves are installed in side pocket mandrels for injection of gas into the tubing string. These valves are manufactured in variety of port sizes to suit a wide range of gas injection volume and flow rates. All the gas lift valves features floating valve seat, which facilitates seat change outs to make valve repair easier and more economical.
OPERATIONS
Injection gas enters the valve and acts on the effective bellow area. As the injection gas pressure overcomes the precharged pressure, the bellow compresses and lifts the stem tip off the seat. Injection gas then flows through the seat, past the reverse flow check valve, and into the production tubing. These valves are fitted with reverse flow check valves at the bottom to prevent production fluid backflow. The reverse flow check valves have elastomeric primary seal and metal to metal secondary seal to prevent tubing to casing communication. Reverse flow check valves are rated to 5000 psi differential pressure.
special features
- Field proven design.
- Guided valve stem for precise alignment with the seat during operation.
- Reverse flow check valve fitted at the bottom to prevent backflow from tubing to casing.
- Mechanical stops limit bellows travel in both directions. This provides bellows protection and assures long life by keeping bellows travel within design limits.
- Tungsten carbide ball and seat provides long wear against abrasive and corrosive fluids.
- Replaceable floating seat.
- Large dome volume gives smooth stable valve operation that prevents stem and seat cutting.
- Manufactured from a variety of premium grade materials to provide corrosion and erosion resistance for the intended application. Stainless steel or Monel options are typically utilized for the outer and main body components.
- These valves can be charged with nitrogen gas from 400-1800 psi.
- Inspection and testing as per the stringent requirements of API 19G2 Specifications.
ENGINEERING DATA FOR WIRELINE RETRIEVABLE INJECTION PRESSURE OPERATED GAS LIFT VALVE
Other UDT GAS LIFT EQUIPMENTS
Wireline Retrievable Orifice Valves
Orifice valves controls the volume of gas through the valve into the production conduit. These valves are used for continuous injection of gas. They are fitted mostly at the bottom of the wells.
Read More Wireline Retrievable Dummy Valves
Dummy valves are used to blank off communication between tubing and casing. In new installations, dummies can be retained in the mandrels until gas lift valves are required.
Read More Side Pocket Mandrel
Side pocket mandrels are a part of tubing string. Side pocket mandrels features an oval body design and threaded connections for installation. in the tubing string.
Read More UDT Kick Over Tools
UDT kickover tools are used to insert & retrieve wireline retrievable gas lift valves, orifice valves and dummy valves from the side pocket mandrel pocket.
Read More Tubing Pressure Operated GLV
UDT tubing retrievable injection pressure operated gas lift valves uses nitrogen charged, multi ply monel bellows to provide the force necessary to.
Read More Tubing Check Valves
UDT tubing retrievable reverse flow check valves are attached to the bottom of tubing retrievable gas lift valves that do not have an integral check valve to.
Read More UDT Conventional Mandrels
UDT conventional gas lift mandrels are equipped with external lugs to receive tubing-retrievable gas lift and orifice valves.
Read More UDT Latches
UDT offers a variety of wireline-retrievable latches for locking gas-lift valves, orifice valves and dummy valves into the appropriate.
Read More UDT Running Tools
UDT running tools are used to install wireline retrievable gas lift valves, orifice valves and dummy valves into the side pocket mandrel pocket.
Read More UDT Pulling Tools
UDT pulling tools are used to retrieve wireline retrievable gas lift valves, orifice valves and dummy valves from the side pocket mandrel.
Read More